[TheNine90]

It seems since you have not coded adaptive the lights wont move.
Check fa and make sure you have correct configuration remove xenon and add adaptive LED. Then try to code.

[rVito]

Originally Posted by TheNine90

It seems since you have not coded adaptive the lights wont move.
Check fa and make sure you have correct configuration remove xenon and add adaptive LED. Then try to code.

but they are not adaptive, just basic ones..Do I still need to code them as adaptive..?

[rVito]

these are mine

[TheNine90]

Then jsut code as led only

[rVito]

Originally Posted by TheNine90

Then jsut code as led only

In another post Ive found out SA code for adaptive led headlights is 552.. Then whats the SA code for NON adaptive LED headlights?

[TheNine90]

5A2 LED headlight

[rVito]

Originally Posted by TheNine90

5A2 LED headlight

Thank you! Finally they work perfectly without errors. I was racking my brain on why they worked well externally but I had adaptive lights errors

FEM still produces these errors, probably because of 0318 time criteria, but nothing to loose sleep over:

[TheNine90]

UGDO OFF
If car car has manuel lwr
MLC_Enable on
Flc_enaxxx off
Lwr_ahl_type manuel

For MFL
LIN_VARIANTE_MFL (Change according to vehicle MFL)

For BEL
LCE_BEL_LIN_VAR

[F30MC]

Hello, i need help about wiring. I upgrade from pre lci xenon to lci led(non adaptive).
What wiring needs to be done? Do i have to put new wires or just re pin the original conector?
Thanks in advance!